UNDER WATER 3D CAMERA


Making underwater 3d camera volume




I wish to take 3d photo in under water! Make My self!!
Base Camera OLYMPUS L-1
Lens UW Nikkor 20mm UW Nikkor 80mm
Stereo Base 72mm
　　　　　　
　　　

　
Compared with under land photo, under water photo is very difficult. We have many problem. example waterproof, water pressure etc….. Especially We work out a solution to synchronize of twin camera and electronic flash. If we not use electronic flash, It is only bleu world. the beginning I connect


  1. Shutter dial
  2. View finder shoe
  3. Strobo connector
  4. Right camera iris diaphragm dial
  5. Remote sensor shoe
  6. Shutter lever
  7. Left camera focus dial


1. Right Camera Housing Connection Connector　　　 2. Left Camera Housing Connection Connector 　　　 　3. Shutter Unit Connection Connector

Although a camera and housing are connected and it can control from an outside by the connector of NO1 and NO2, note that the number of codes is different in NO1 and NO2. The shutter unit of Camera B is separated from the control circuit of B main part, and even if it pushes a shutter lever, the number of Camera B of codes with which the control circuit of Camera A carried out, therefore it has come out of Camera A, such as two shutter control and ignition timing of a stroboscope, increases altogether by linking directly winding up of a film, the shutter unit of Camera A to which only shutter charge does not become precocious, and the shutter unit of Camera B by the connector of NO3.

although it is the reason which became the camera which synchronizes completely theoretically now, load is applied as passed, and it comes out, and the circuit of Camera A surely breaks Please contact me, if the solution method of this problem is understood by some people. Since there is an individual difference, although it cannot generally say, it has about 20-150 by 36EX(s). When you make also personally, please manufacture under accountability.



HOME STEREO BASE